Page 214 - 爱玛瑞

Hydraulic Jack HMR series
i-LIFT hydraulic jacks for repairs, maintenance and installation of heavy machines

● Compact and stable construction.
● Can be used in any position.
● Housing revolves 360 degrees.
● Lowering speed can be accurately adjusted.
● Protected against overloading.
● Pump lever is removable.
● According to CE and US standard USA ASME/ANSI B30.1.1986.

HM50R HM100R HM250R
CAUTION S
To avoid possible personal injury or damage to equipment
Do not exceed the maximum load capacity of the jack. An unstable load may cause the jack or load to slip.
Do not add additional load to a lifted load. Do not use jack(s) if damaged, altered or in poor condition.
Do not use in unstable or hazardous positions. Do not lift people or loads with people on or underneath them.
Unit must be used on flat surfaces able to carry the load. Do not lift at the end of the toe.Fully engage the load with the toe.
The load must be stable during lifting.

920/840
520
520 74.5 91 142.5 155
90
55
77 76
53 420/650 10t 494 505/720 25t
368/573 5t 438 230 215
205
58
120 220 70
115 30
25 205 420
213 459
280
98 190 98 190
140 93 170 108 283 210 175
275
740 745
1305/1225

2311101 2311102 2311103
HM50R HM100R HM250R
kg(lb.) 5000(11000) 10000(22000) 25000(55000)
mm(in.) 25-230(1-9) 30-260(1.2-10.2) 58-273(2.3-10.7)
mm(in.) 368-573(14.5-22.6) 420-650(16.5-25.6) 505-720(20-28.3)
kg(lb.) 38(83.6) 40(88)
kg(lb.) 25(55) 35(77) 102(224.4)

213